产品展示首页 > 产品展示 > 德国IFM易福门 > IFM传感器 > PI2094现货IFM传感器PI-010-RES30

产品名称:PI2094现货IFM传感器PI-010-RES30

产品型号:

产品报价:

产品特点:PI2094现货IFM传感器PI-010-RES30它可用于检测直接引起光量变化的非电量,如光强、光照度、辐射测温、气体成分分析等;也可用来检测能转换成光量变化的其他非电量,如零件直径、表面粗糙度、应变、位移、振动、速度、加速度,以及物体的形状、工作状态的识别等。光电式传感器具有非接触、响应快、性能可靠等特点,因此在工业自动化装置和机器人中获得广泛应用。近年来,新的光电器件不断涌现,特别是CCD图

PI2094现货IFM传感器PI-010-RES30的详细资料:

品牌IFM/德国易福门

PI2094现货IFM传感器PI-010-RES30

ifm传感器中的电阻应变片具有金属的应变效应,即在外力作用下产生机械形变,从而使电阻值随之发生相应的变化。电阻应变片主要有金属和半导体两类,金属应变片有金属丝式、箔式、薄膜式之分。半导体应变片具有灵敏度高(通常是丝式、箔式的几十倍)、横向效应小等优点。利用激光技术进预*预*预*预*预*预先进行测量的传感器。

它由激光器、激光检测器和测量电路组成。激光传感器是新型测量仪表,它的优点是能实现无接触远距离测量,速度快,精度高,量程大,抗光、电干扰能力强等。
激光传感器工作时,先由激光发射二极管对准目标发射激光脉冲。经目标反射后激光向各方向散射。部分散射光返回到传感器接收器,被光学系统接收后成像到雪崩光电二极管上。雪崩光电二极管是一种内部具有放大功能的光学传感器,因此它能检测极其微弱的光信号,并将其转化为相应的电信号。

利用激光的高方向性、高单色性和高亮度等特点可实现无接触远距离测量。激光传感器常用于长度(ZLS-Px)、距离(LDM4x)、振动(ZLDS10X)、速度(LDM30x)、方位等物理量的测量,还可用于探伤和大气污染物的监测等。

PI2094现货IFM传感器PI-010-RES30的资料

Applicationhygienic systems
Installationfreely rotatable housing 350°
Mediaviscous media and liquids with suspended particles; liquids and gases
Medium temperature [°C]-25...125; (145 max. 1h)
Pressure rating
 
50 bar725 psi5 MPa
Min. bursting pressure
 
150 bar2175 psi15 MPa
Type of pressurerelative pressure
No dead spaceyes
Electrical data
Operating voltage [V]18...32 DC
Current consumption [mA]< 50
Min. insulation resistance [MΩ]100; (500 V DC)
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]0.5
Integrated watchdogyes
Inputs / outputs
Number of inputs and outputsNumber of digital outputs: 1; Number of analogue outputs: 1
Outputs
Total number of outputs2
Output signalswitching signal; analogue signal; (configurable)
Electrical designPNP/NPN
Number of digital outputs1
Output functionnormally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]2
Permanent current rating of switching output DC [mA]250
Switching frequency DC [Hz]6
Number of analogue outputs1
Analogue current output [mA]4...20, invertible; (scalable 1:4)
Max. load [Ω](Ub - 10 V) / 20 mA
Analogue voltage output [V]0...10, invertible; (scalable 1:4)
Min. load resistance [Ω]2000
Short-circuit protectionyes
Type of short-circuit protectionpulsed
Overload protectionyes
Measuring/setting range
Measuring range
 
-1...10 bar-14.5...145 psi-0.1...1 MPa
Set point SP
 
-0.98...10 bar-14.2...145 psi-0.098...1 MPa
Reset point rP
 
-1...9.98 bar-14.5...144.7 psi-0.1...0.998 MPa
Analogue start point
 
-1...7.25 bar-14.5...105.1 psi-0.1...0.725 MPa
Analogue end point
 
1.75...10 bar25.4...145 psi0.175...1 MPa
In steps of
 
0.01 bar0.1 psi0.001 MPa
Factory setting
 
 SP1 = 2.50 barrP1 = 2.30 bar
 ASP = 0.00 barAEP = 10.00 bar
Accuracy / deviations
Switch point accuracy [% of the span]< ± 0,2; (Turn down 1:1)
Repeatability [% of the span]< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation [% of the span]< ± 0,2; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086)
Linearity deviation [% of the span]< ± 0,15; (Turn down 1:1)
Hysteresis deviation [% of the span]< ± 0,15; (Turn down 1:1)
Long-term stability [% of the span]< ± 0,1; (Turn down 1:1; per year)
Temperature coefficient zero point [% of the span / 10 K]< ± 0,05; (0...70 °C)
Temperature coefficient span [% of the span / 10 K]< ± 0,15; (0...70 °C)
Response times
Response time [ms]< 100
Damping for the switching output dAP [s]0.1...100
Damping for the analogue output dAA [s]0.1...100
Step response time analogue output [ms]25

 如果你对PI2094现货IFM传感器PI-010-RES30感兴趣,想了解更详细的产品信息,填写下表直接与厂家联系:

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
在线客服